Edit result by manual

From Mulka2
Jump to navigation Jump to search

Summary

This article explains how to edit or input competitor's result manually. For example, if the competitor is disqualified because he entered an out of bounds area, he lost his E-card, etc., you would want to change the competitor's result to DISQ. Also, if the competitor's E-card was broken or the results was not recorded properly, you would check the competitor's backup patch and would want to input the competitor's result manually.

How to Do This

There are 2 ways to edit or input competitor's result manually.
1. If you have to input a lot of data, use the "Change Result" window to input data quickly and continuously by using only the keyboard.
2. If you only have to edit/input one or a few competitors' data, use the "Competitor Info" window to edit the data by each competitor.

Using the "Change Result" Window

Main window >> [Input/Edit (I)] >> [Result Data (R)] The "Change Result" window will be shown. Input the competitor's start number and press the Enter key. The competitor's result will be shown, so type in the true result using "hmmss" format or the time of finish using "hhmmss" format (colon(:) is optional). If you want to disqualify the competitor, input "DISQ", "P1", "DNS" etc.(By inputting "DNS", you can make the competitor absent). If the result is shown as DISQ but you want to cancel it, input either the result, the finish time, or "OK." If you input "OK" and the finish time is recorded properly in the E-card, that will be the runner's result. Press the Enter key to finish inputting.
In this way, you do not have to use the mouse to input data, therefore you can continuously and quickly input data. However, you have to know the competitor's start number to do this, and if you do not know it, you have to use the "Competitor Info" window.

Using the "Competitor Info" Window

Go to the "Competitor Info" window by inputting the competitor's name or start number in the search box placed in the left-bottom side of the main window, or double-clicking the competitor's name. Next, click the "Change Result" button to show the competitor's "Change Result" window. After that, follow the instructions written above in "Using the 'Change Result' Window."

Checking Card Data Details

河野注.以下は現行のMulka2では大きく内容が変わっているので保留。

■ 記録の詳細 Mulka 2で記録の計算に使用される情報は競技者情報ウインドウの記録詳細タブで確認することができます。
記録詳細.gif 第1計時に表示される内容は主に光電管を使用した場合にRTR2から取得した情報になります。 第2計時に表示される内容は主にリーディングユニットでEカードを読み取った場合に取得した情報になります。 手動変更に表示される内容はここで説明した手入力による記録になります。 なお、時間・時刻は100分の1秒単位の情報になります。

Mulka 2は計6つあるフィニッシュ時刻と競技時間より定められた優先順位に基づいて一つの競技時間を決定します。 優先順位は手動変更>第1計時>第2計時となります。競技時間が決定されたらスタート時刻に競技時間を加えたものをフィニッシュ時刻とします。

それとは別に3つあるペナチェック情報から同様に優先順位に基づいて一つのペナチェック情報を決定します。 このペナチェック情報が「OK」または空の場合は先に決定した競技時間がその選手の記録となります。 それ以外の場合は(例えばペナチェック情報が「DISQ」)そのペナチェック情報が選手の記録となります。

応用として記録の入力を取り消したい場合、この記録詳細を編集して第1計時~手動変更に入力されている内容を消去すれば記録の入力が取り消されます。 ラップ情報も消去したい場合は競技者情報ウインドウでカート詳細・対応ボタンをクリック、続けて特別対応ボタンをクリックし特別対応画面を表示して読み込み解除ボタンをクリックしてください。